氧化锆生产废水处理工艺

以调节沉淀-汽提处理技术作为氧化锆生产废水的处理工艺,对主要构筑物做出工艺设计,运行结果表明该工艺具有出水水质稳定、处理效率高、流程简洁、操作简便等特点.是处理含高浓度氨氮、可生化性差的工业废水的一种适用技术.     

The effect of pyrolysis atmosphere on bio-oil yields and structure

A food industry waste, almond shell, was pyrolyzed under three different environment static, nitrogen, and steam to produce bio-oil and its derivatives. The oil yield obtained at pyrolysis temperature of 600°C was 24.23% in a static atmosphere, whereas it increased to 27.25% and 33.05% in nitrogen and steam atmospheres, respectively. The bio-oil obtained under steam atmosphere is very efficient due to the production of high liquid and gas yields. Moreover, co-feeding steam during the pyrolysis altered the bio-oil structure by increasing the aliphatics and reducing the asphaltenes. Moreover, steam treatment also increases H/C and heating value of bio-oils. According to the obtained results, steam pyrolysis is an alternative option for future applications in refineries.     

DOC+CDPF对重型柴油车排放特性的影响

基于重型转毂试验平台对比研究国Ⅲ重型柴油车加装催化型连续再生颗粒捕集器(DOC+CDPF)前后的气态物及颗粒物排放性能,结果表明从市区循环、公路循环到高速循环,原车的CO、THC、CO_2及颗粒质量(PM)排放因子依次减小,NO_x及颗粒数量(PN)排放因子依次增大,颗粒数量浓度随粒径呈双峰分布并且以聚集态颗粒排放为主;加装DOC+CDPF后,各污染物排放因子均有所下降,且下降趋势从市区循环、公路循环到高速循环依次增大,从整个C-WTVC循环来看,CO排放因子下降70.36%,THC排放因子下降72.73%,CO_2排放因子下降17.00%,NO_x排放因子下降7.76%,PM、PN排放因子分别下降93.77%和98.91%,颗粒数量浓度随粒径仍呈双峰分布,但排放以核模态颗粒为主,并且聚集态峰值对应粒径减小.     

注汽锅炉烟气余热利用技术应用

通过对注汽锅炉烟气余热利用潜力分析和开展余热利用方式对比分析,采用了在对流段安装热管换热器,通过换热器将烟气余热与助燃空气换热,余热利用技术的现场应用,实现了注汽锅炉燃料单耗降低的目的,取得良好的节能效果。     

Marley逆流式冷却塔在炼厂的应用

介绍冷却塔的主要特点及其可供借鉴参考之处。     

医疗废物高温蒸汽灭菌处置工艺

医疗废物高温蒸汽灭菌处置工艺是一项适合于处置10 t/d以下感染性医疗废物和损伤性医疗废物经济可行且对环境有益的技术。从医疗废物的组成及其影响因素出发,探讨了医疗废物的处置工艺原理,介绍了高温蒸汽灭菌工艺流程和技术特点,通过与焚烧工艺比较,突出了高温蒸汽灭菌工艺的优越性及其适用性。     

焦炭塔钢丝绳张紧器更换的施工与安全技术

介绍了焦炭塔钢丝绳张紧器更换过程,分析了更换过程中易发生的事故,提出了安全对策。     

总铬分析前处理方法的改进探讨

采用密塞高压蒸汽法代替锥形瓶,加热氧化法测定总铬,缩短了分析时间,操作简便,分析结果精密度高、准确度好。